I am going to explain how to set every thing up based on the video from my previous post and the steps for the project.
Step one: Go to your local hard ware store and pick up the products needed.
Step two: Place net pots into your regular pots and screw the 3/4 inch fitting into the pump.
Step three: Pull out the black tube on the flush and replace it with the blue netted fitting.
Step four: Drill a total of three holes in the designated areas into the tote top as it is on the mixing tray (Areas specified in the video).
Step five; Insert fittings into the drilled holes.
Step six: Place drilled tub lid on top of the inserted fittings in the mixing tray.
Step seven: Drill a hole in the far right hand corner for the power cord to the pump.
Step eight: Attach 3/4'' tubing to the pump and place it in the bottom of the tote.
Step nine: Feed the tube through the left hand hole and connect to the fill fitting.
Step ten: Place completed parts together (tote lid on tote mixing tray on lid) and then put the pots in rows of 3 horizontally.
Credit/ video:https://www.youtube.com/watch?v=6t8S3ln4JCg
No comments:
Post a Comment